Projector Tests: Day 2 of 2

IMG_9933

We met to do another round of projection tests, this time outside. While we still only had two projectors to work with for the test, we definitely verified an increase in brightness on outdoor surfaces (both with ambient light and without), though this increase is not equal to the amount of light we’re throwing at it—that is, shining two projectors with the same images at the same point does not double the brightness.

IMG_9927

These photographs have an approximately one second exposure, but the difference between one and two projectors will be helpful. For all of these tests we were working the projectors by holding them up by hand and attempting to cooperate to line them up.

IMG_9926

This photograph is with just one projector.

IMG_9920

With two projectors (and a longer exposure time), the problem with using two projectors becomes very evident—lining up the images. So, while we agreed that we need to test three projectors, we also need to figure out a kind of rig that we could easily build to allow us to line up multiple projectors, while having them all tethered together to decrease the movement.

IMG_9931

Projecting onto trees looks great from the right angle, but due to the depth changes of the branches and leaves, it’s really only visible from the same angle as the projection.

IMG_9949

After testing on a side of a dark house, we moved across the street to test on a wall with a lot of ambient light.

IMG_9945

We would never be able to work with a wall that has a light shining right onto it, but testing this way does help us to understand the tolerance of the image’s legibility next to ambient light.

IMG_0009

We moved further into the parking lot to allow us some more distance from the wall and to project onto a dark wall. Danielle, Michelle, and Mike sorted out the cables between projectors and the computer along with our 100′ extension cord.

IMG_0006

Setup is always a bit of tough when trying to get power from an unknown source.

IMG_0005

In this case, we grabbed power from an outdoor outlet, but we had to test a number of them before finding a working one.

IMG_0004

We also started discussing the best way to continue with tests on a dark brick wall with less ambient light.

IMG_0003

We again started to discuss some kind of rig we could build to make the projections line up much easier.

IMG_9999

One projection onto the wall turned out pretty well, but this wall is likely darker than the one we’re actually looking at using.

IMG_9983

Michelle and Danielle work with two projectors; a one second exposures really highlight the need for a rig.

IMG_9970

With two projections, I went back at least 400 meters and the image was still easily visible (and at that distance, the movement between images is less noticeable).

IMG_9966

Our next tests will have to be with a third projector and a rough mockup of a rig to hold them all in place.

IMG_0012

We headed back to HQ to finish preparing for Monday’s algorithmic walk.

IMG_0069

Back inside, we started to talk about some of the logistics of the walk, along with making a to-do list that we need to get through by Monday afternoon.

IMG_0058

Cristina, Michelle, and I worked on the flyers that we’ll be handing out first thing Monday. We were going to print on paper, but then remembered the huge piles of mylar we have (thanks to Mike). Given the abuse that the paper that the algorithms were printed on went through the last time we tried an activity like this, we figured printing out the algorithms and the flyers on something a bit more durable (and interesting) would be a good choice.

IMG_0042

Meanwhile, Danielle and Mike work on getting a set of steps for our algorithm ready.

IMG_0064

Here are some of the flyers on clear mylar.

IMG_0061

We eventually decided on printing on the matte side of the mylar, but in reverse so that it’s legible from the glossy side. It took some experimentation to get the flyers legible.

IMG_0053

The mylar we had was quite large, so we had to cut it down.

IMG_0050

The flyers are most legible when held up to a light source.

IMG_0044

We ended up printing most of the flyers on red mylar, but we’ll print the algorithms on clear mylar to make it easier to read.

IMG_0039

Here’s the final flyers that we’ll cut down and pass out on Monday morning to remind folks to come out.

8 Replies to “Projector Tests: Day 2 of 2”

  1. It always seems like I’m not actually at these meetings haha.
    I’m super excited about the projector tests though! We had great progress last night!
    The walk tomorrow will be AWESOME now that we have the coolest flyers ever.
    woooo

    1. Ahhhhh that’s my bad, usually I take photos, but I forgot to last night!!! Next time, I’ll be on it.

      Tomorrow will be awesome!!!!

  2. i would really love to help with the cross border communication project, let me know if there’s things i can do!

  3. I can investigate the properties of throwing light on the cheap for you guys from my ‘theatre’ tech buddies. They have to know something about this whole brightness thing. Have you tried the entertainment tech lighting department at St. Clair?

    1. Jolie, any info you can pass along would be awesome, contact St.Clair is probably a good idea, I’ll start digging around.

      Erin, we’ll keep you posted, if you know of anyone with any connections to projectors (at this point, low or high powered, let us know!)

  4. I think looking into lighting technology and some kind of template as suggested above would be best. For something as simple as white text, typical projectors are basically overkill. With some other form of lighting technique you can throw out all the extra stuff you don’t need and just focus on getting the most light and the largest image.

    However, if you continue to test using projectors and you need mobility, you could free yourself of a cord by using a good powerful automotive power inverter. I just got an 800 watt one, should be able to power a few projectors. Contact me if you want to try it out.

    1. Hi Mike,

      You’re probably right in that the technology might be overkill for what we’re hoping to do, but ultimately, I figured that it’s probably easier to get something that bright out of a projector than something else (one of those search lights could be awesome though).

      We’re also looking into a power inverter, so your offer to try out yours is certainly welcomed. Where did you pick yours up?

Comments are closed.