DX Salon Nights: In Conversation
Poster for DX Salon Night with BCL & DoUC
Michelle and Justin head up to Toronto on December 8th at 6:30pm at 234 Bay Street for an interview with the Department of Unusual Certainties, as part of the ongoing DX Salon Night.
Not familiar with the Design Exchange?
The Design Exchange (DX) is Canada’s design centre and museum with a mission to promote the value of design. We are an internationally recognized non-profit educational organization committed to promoting greater awareness of design as well as the indispensable role it plays in fostering economic growth and cultural vitality. We build bridges by improving communication between various design disciplines, educators, businesses and the general public through programs, exhibits, lectures, and workshops.
Yes, we’re excited. Hope you’ll join us.
![We’ve been working on paper planters for a while, but over the last couple of days I started experimenting with magnets as well. Ideally, these could work with having some rare earth magnets embedded in the paper. Still more research and development to be done, but I think it’s getting closer. The first step was [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2009/04/img_3950-150x150.jpg "Researching Planters")
![Day two of Create Here‘s City Share Conference was just as busy as the first, but we got tons of work accomplished, and we were even able to take a short tour of the city at lunch! After breakfast, we broke off into our groups once again. We were still trying to come up with [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2010/02/IMG_0531-150x150.jpg "Day Two of the City Share Conference in Chattanooga, TN!")
![There’s a lot to say about the Creative Time Summit: Revolutions in Public Practice 2, though I’m not really sure where to start. You should start by visiting the Creative Time Summit site and watching the presentations for yourself, then you should read the excellent recap essay by Gregory Sholette and the somewhat brief, but [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2010/10/IMG_3702-150x150.jpg "Creative Time Summit: Some Reflection with 4 Days of Distance")
![424 Pelissier was a fun space for kids to be creative all day on Sunday as part of Imagination Lab. Merry Ellen set up her baking station over in that space. Later Sunday night, I accompanied Laura to do some more installations. The kids had a lot fo fun interacting with each other and learning [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2010/07/DSC_0650-150x150.jpg "SRSI, Day 24: Imagination Lab & Disco Balls")
![Although it’s been a while since I last worked on this project, things are continuing to move along. I finally assembled the Ladyada XBee adapters and successfully passed a message between the two XBees. So, I’m not the best solderer and the first adapter I worked on suffered from an overusing tip on my soldering [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2010/05/IMG_9485-150x150.jpg "XBees + Arduino")
![Months of work and research culminated in a 3am submission to Blurb to print our How to Forget the Border Completely publication. It’s about 150 pages long. I’m really happy with this, and I can’t wait to get it back in print. Above, a screenshot of some of the pages in the PDF. In terms [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2011/10/Screen-Shot-2011-10-06-at-9.15.16-AM-150x150.png "How to Forget the Border Completely, submitted for print!")
![Broken City Lab Office Hours last night were hugely productive due, in no small part, to the many amazing people around the table last night. We completed a test with the flagging tape at Lebel (as you can see above) for the EC Row project and continued working on the LED sign. There’s lots of [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2009/01/img_2316-150x150.jpg "Fence Text + LED Soldering")
![Starting on January 15, 2013, we’ll be offering a new workshop series for anyone and everyone interested in learning about electronics and physical computing. Hosted by Paul Anderson – a man of too many hobbies who holds the advanced qualification for ham radio in Canada, and has been working with electronics on and off since childhood [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2012/12/BEDO-POSTER-150x150.jpg "New Workshop Series Starting in January: Building Electronics / Designing Originally")
![Just little reminder if you’re in the Hamilton area… Vous invite à participer à : « Les Fables d’une Chronologie – L’atelier des Histoires de Hamilton » Développé de la recherche amassée des archives et de questionnaires présentés aux habitants de Hamilton, l’atelier Les Fables d’une Chronologie engagera ces participants à créer collectivement une histoire vaste [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2012/03/IMG_7103-150x150.jpg "The Tales of a Timeline / Les Fables d’une Chronologie")
![Now that Intersession is done, we’ve finally been able to put that downtown space to some use. Cristina and I spent the better part of the day in the space, using it basically as an office, but we’ll be there at least one more day this week and potentially one day on the weekend picking [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2009/06/IMG_0583-150x150.jpg "Being Productive Again: Day 1")
![Last Wednesday, Justin, Michelle, Josh and I flew from Detroit, MI to Atlanta, GA and drove another two hours to Chattanooga, TN for the City Share conference put on by our friends from Create Here! Veronique picked us up from the the airport in Atlanta. We grabbed a bit of food and then headed straight [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2010/02/IMG_3050-150x150.jpg "Our Arrival to Chattanooga, TN and Day One of the City Share Conference!")
![Thursday was the Storefront Success Stories Speed Dating for Store Owners event down on Pelissier for SRSI, and Justin set up a window installation using the Arduino. Using the same format as the text on the billboards running in Windsor until July 15th as part of the conclusion of Save The City, The Arduino in [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2010/07/IMG_1618-150x150.jpg "SRSI, Day 28: Speed Dating for Store Owners")
![Danielle painted this today with some bronze spray paint. It’s that horse head from our living room. I was thinking that if we picked up on that plaque / time capsule project we’ve been talking about with a rubber mould and some plaster, we might be able to move it forward? Let’s talk more about [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2012/01/IMG_6603-150x150.jpg "Bronze (this will all make sense next week)")
![The Magnetic Planters project continues. With Michelle and Danielle away this week, the rest of Broken City Lab had to relearn the process of making paper pulp. It was a good night, though we’re hoping to get this project finished in the next week or so. As Intersession begins, we’ll be shifting our Office Hours [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2009/05/img_5161-150x150.jpg "Planters Nearing Completion")
![One of the best things ever is receiving a bunch of laser cut material in the mail. That means, today wound down with one of these best things. We’ve ordered through Ponoko in the past and we’re continually surprised with how an Illustrator drawing can turn into a physical object so easily. Yes, above that is [...]](http://d1ugx41kvdwavn.cloudfront.net/wp-content/uploads/2012/12/wpid20753-IMG_1844-150x150.jpg "Acrylic and Aluminum Laser Cuts & Drift V2 ready for review, plus notes on AJAX problems + solutions")
Comments
One Response to “DX Salon Nights: In Conversation”Trackbacks
Check out what others are saying...[...] audio from the interview Justin and Michelle did with the Department of Unusual Certainties at the Design Exchange back in December!!! We’ll be returning the favour, hopefully soon.D/X Saloon Night: DoUC in conversation with [...]